.:Techniques Information:.
RCI 15 ................... download or print pdf
DESCRIPTION:
RCI 15 is a non-asbestos, semi-flexible friction material. It is available in roll form and is suitable for use under dry operating conditions only. (I.e. It is unsuitable for use in oil). As with other materials from this range RCI 15 is sufficiently flexible when supplied in rolls to make fitting to curved metal parts a relatively simple operation, after which the heat generated in service will increase its strength and stiffness.
Alternatively, RCI 15 can be heat treated in an oven at a temperature of between 200 & 230ºC for a period of not less than 60 minutes, either before or after fitting.
The frictional characteristics of RCI 15 in both its initial flexible and heat treated states are virtually identical. It exhibits excellent temperature and wear resistance and is quite in operation.
This material was specifically developed for attaching to brake-shoes by bonding and is unsuitable for rivetting.
SOME TYPICAL APPLICATIONS:
Industrial drum and band-brakes.
Crane and excavator brake and clutch linings.
Miscellaneous industrial devices.
ADHESIVES:
The use of any well known thermosetting adhesive is recommended.
RUBBING SURFACES:
Good quality, fine grained pearlitic cast iron with Brinell hardness of 150-200 is recommended.
PHYSICAL PROPERTIES:
Density g/cm3 .... 1.71
Hardness (SHORE-D) .... 65
MECHANICAL PROPERTIES:
Ultimate tensile strength longitudinal .... 7.6 MN/m2 (1.100lbf/in2)
Ultimate compressive strength .... 45.0MN/m2 (6.550lbf/in2)
Ultimate shear strength longitudinal .... 5.2MN/m2 (750lbf/in2)
FRICTION PROPERTIES:
Friction coefficient (dynamic)µ
(See graph) .... 0.38
Friction coefficient µ .... 0.35
(static-cold)
INTERVALLO DI UTILIZZO CONSIGLIATO:
Pressure
Dynamic .... 70-860 kN/m2 (10-125 lbf/in²)
Static .... 70-2410 kN/m2 (10-350 lbf/in²)
Max. rubbing speed .... 25m/s (82ft/s)
Max. continuous temperature .... 150 ºC
Max. Intermittent temperature .... 250ºC
Max. temperature .... 325ºC
SIZE RANGE:
Roll
Lenghts:7,5 metres up to and including 6.4mm thick
5.0 metres 6.5mm and above
Maximum width: 330 mm
Thickness range: 3,0 to 12,7 mm
µ (friction coefficient) vs temperature @79N/7 m/s
........................................................................ Torna su